Éloigné
Sensors to be installed out of view, with analog outputs for a sensor monitor or the HMI.
PSE560, Capteur de pression analogique à distance, usage général, IP65
Les PSE560 et 564 sont des capteurs de pression à distance avec un signal analogique V ou mA. Les capteurs PSE56MD mesurent la pression de tout liquide ou gaz non corrosif à 316 L d'acier inoxydable. 560 est pour la plage de pression d'un système pneumatique standard, tandis que le modèle 564 est pour la basse pression. Une précision de 1 % de la plage de pression nominale à l'échelle complète convient aux applications à usage général. Inclut un câble fixe avec option de connecteur câblé sur le terrain. PSE560 et PSE564 sont conformes uL/CSA, CE et RoHS, avec des cotes d'enceinte IP65.
PSE570, Capteur de pression analogique à distance, amélioré, IP65
PSE570 remote pressure sensors offer positive pressure ranges from 500 kPa to 10 MPa, with increased proof pressures and a higher withstand voltage for improved durability in unpredictable conditions. A nickel-plated C3604 brass port and ceramic sensor impart compatibility with a wide range of liquids and gases. An analog V or mA signal ouput is transmitted over a cable with an M12 connector. Accuracy is ±1% full scale for pressure below 1 MPa and ±2.5% for higher ranges. PSE570 sensors are CE and RoHS compliant, with an IP65 enclosure rating.
PSE570, Capteur de pression pour fluides conventionnels
PSE570 remote pressure sensors offer positive pressure ranges from 500 kPa to 10 MPa, as well as a compound range of -100 to 100kPa. Enhancements include increased proof pressures and a higher withstand voltage for improved durability in unpredictable conditions. A nickel-plated C3604 brass port and ceramic sensor impart compatibility with a wide range of liquids and gases. These models feature IO-Link or two switch outputs. IO-Link provides measured pressure values, device information and status, and report of any cable break when connected through any IO-Link master. Switch outputs respond to a preselected set point and hysteresis value with an ON / normal or OFF / reversed output signal. Accuracy is ±1% full scale for pressure below 1 MPa and ±2.5% for higher ranges. PSE570 sensors are CE and RoHS compliant, with an IP65 enclosure rating.
