SY5100-X32, 5 port 2 position single solenoid valve with a return spring

The SY5100-X32 is a 5 port 2 position single solenoid valve with a return spring and spool position detection for control of the pilot air to externally piloted downstream valves.  In case of a pressure loss or drop, the spool moves to its safe position regardless of the applied electrical control signal.  The downstream valves will return to or remain in their defined safe state due to the removal of the pilot air  supply.  Valve control is affected via an M8 connector which can be connected directly to the safety PLC, safety relay, or other safe  control point.

  • Use with SY50M-2-20A-C0 manifold block
  • Valve position when valve is OFF:  signal output
  • Compatible with SY series manifolds
  • M8 3 pin, M8 4 pin and M12 4 pin connections for detection switch

This valve requires the use of the SY50M-2-20A-C0 manifold block to function. This block is used at the beginning of the control zone to facilitate the pilot air control function. Pneumatic pilot air control is not possible without this block.  F08 pressure switches can be mounted in this block to confirm the removal of pilot air pressure.

SY5100-X32, 5 port 2 position single solenoid valve with a return spring
Configuration Options
  
 
Copy Configuration Number

Product Options

List updates based on your most recent configuration changes.
Select Product Options
Select values from the drop down lists or make appropriate selections to configure the part number.
Rated Voltage Configuration Status
Light & Surge Suppressor Configuration Status
Wiring and Output Type Configuration Status
Cable Length Configuration Status
Connector Specifications Configuration Status
Options in:
  • Gray are not compatible with other selected option value.
  • Red conflict with another selected option value.
  • Amber are not recommended.

Downloads

The part number needs to be complete in order to view/download CAD Models.

Model does not exist, please email cad@smcusa.com with the complete part number, CAD file format and version required.

CAD is not currently available for auto generation of . The file can be requested by contacting CAD@smcusa.com

CAD Downloads

Download CAD File

View CAD Models

View 3D Model

Product Catalog

Series Catalog

RoHS Certificate

Download Certificate