Remote Air/Liquid Sensors
Sensors to be installed out of view, with analog outputs for a sensor monitor or the HMI.
PSE560, Remote Analog Pressure Sensor, General Purpose, IP65
PSE560 and 564 are remote pressure sensors with an analog V or mA signal output. PSE56* sensors measure pressure of any liquid or gas non-corrosive to 316L stainless steel. 560 is for a standard pneumatic system's pressure range, while the 564 model is for low pressure. An accuracy of ±1% of the full scale rated pressure range is suitable for general purpose applications. Includes a fixed cable with field wired connector option. PSE560 and PSE564 are UL/CSA, CE and RoHS compliant, with IP65 enclosure ratings.
PSE570, Remote Analog Pressure Sensor, Enhanced, IP65
PSE570 remote pressure sensors offer positive pressure ranges from 500 kPa to 10 MPa, with increased proof pressures and a higher withstand voltage for improved durability in unpredictable conditions. A nickel-plated C3604 brass port and ceramic sensor impart compatibility with a wide range of liquids and gases. An analog V or mA signal ouput is transmitted over a cable with an M12 connector. Accuracy is ±1% full scale for pressure below 1 MPa and ±2.5% for higher ranges. PSE570 sensors are CE and RoHS compliant, with an IP65 enclosure rating.
PSE570-L2, Remote IO-Link Pressure Sensor for General Fluids, Enhanced, IP65
PSE570 remote pressure sensors offer positive pressure ranges from 500 kPa to 10 MPa, as well as a compound range of -100 to 100kPa. Enhancements include increased proof pressures and a higher withstand voltage for improved durability in unpredictable conditions. A nickel-plated C3604 brass port and ceramic sensor impart compatibility with a wide range of liquids and gases. These models feature IO-Link or two switch outputs. IO-Link provides measured pressure values, device information and status, and report of any cable break when connected through any IO-Link master. Switch outputs respond to a preselected set point and hysteresis value with an ON / normal or OFF / reversed output signal. Accuracy is ±1% full scale for pressure below 1 MPa and ±2.5% for higher ranges. PSE570 sensors are CE and RoHS compliant, with an IP65 enclosure rating.
PSE-ST Sensor Set-up Tool for IO-Link Enabled PSE Pressure Sensors
PSE-ST is a sensor set up tool to access and write the parameters for IO-Link enabled PSE540 and PSE570 remote pressure sensors. The user interface includes three buttons and a 3-color, 3-screen display similar to the ISE20 sensors. 5V power is supplied by the user's mobile battery through a USB-C port. Cable options include an M12 connector or a flying leads connector on the sensor side, and a push-in connector on the set-up device side. Cables are also sold separately.